Advantages of curved LED transparent display screen, how is the structure realized?
At present, the LED display screens in the curtain wall are basically square in the country, which is a bit of a monotonous. If you can make some creative shaped transparent LED screens, such as curved surfaces or angle selection, the surprising design will attract more people's attention.
Advantages of curved transparent LED display:
First, a better visual experience.
The human eyeball has a convex curvature, and the curved surface of the curved LED transparent screen can ensure that the eye can be visually conveyed to the human eye after seeing the screen. The same is true for TV and display screens, which provide a better sensory experience and a consistent sensory experience, whether in a central location or not.
Second, greater flexibility.
Most TV, tablet, and notebook screens are now flat. However, if you want to make a watch, the flat screen may be very limited. At this time, the curved screen can be used for its flexibility, and he can create some specific curvature to meet the product requirements. Similarly, many large commercial plazas have also adopted a transitional, all-round curved transparent LED display that helps advertisers make better use of space and accurately communicate information to more people.
How to do curved LED transparent screen?
The LED transparent screen surface is divided into inner arc, outer arc, arc. For the curved LED transparent screen, if the traditional horizontal module is used, it will cause many problems, such as large seams, the screen curvature is not smooth, and can not adapt to the large arc. occasion. Therefore, in order to ensure the smoothness of the arc as much as possible, the vertical module is often used to achieve better surface smoothness, and it is easy to assemble into a large arc display.
There are more curved LED transparent screens on the market. There are three main practices
1. The radius of the arc is more than 1 meter, and the box is made into a vertical strip shape.
2. The radius of the arc is between 0.5m and 1m. The box should be made into a curved shape, and then the unit module is spliced.
3. If the radius of the arc is less than 0.5 m, only the unit can be specially made, and the unit is made into a vertical strip. In addition, the screen steel structure also needs to be curved.